MIB Transfer from the IETF to the IEEE 802.3 WG

This RFC 7448 was published in 2015.

Abstract

This document records the transfer of responsibility for the Ethernet-related MIB modules DOT3-OAM-MIB, SNMP-REPEATER-MIB, POWER-ETHERNET-MIB, DOT3-EPON-MIB, EtherLike-MIB, EFM-CU-MIB, ETHER-WIS, and MAU-MIB from the IETF to the IEEE 802.3 Working Group (WG).
This document also describes the procedures associated with the transfer in a similar way to how RFC 4663 records the transfer of the IETF Bridge MIB work to the IEEE 802.1 WG.

RFC 7448 introduction

[RFC4663], published in September 2006, described a plan for transferring responsibility for four MIB modules related to bridges from the IETF to IEEE 802.1.
Some years later, responsibility for eight more MIB modules was transferred from the IETF Ethernet Interfaces and Hub MIB (hubmib) WG to the IEEE 802.3 WG.
The MIB modules concerned are tabulated below (Section 2).
[RFC4663] clearly enunciates the motivation for both transfers and also provides an introduction to IEEE standardization procedures.
The discussions of those topics will not be repeated here.

Download links

Click here to download RFC 7448: TXT format PDF format (coming soon)

Related Request for Comments

Popular RFCs

©2015 RFC-Base.org - all rights reserved.